Access Keys:
Skip to content (Access Key - 0)

How do I reboot a workstation?

If you need to reboot a workstation, either because it has frozen or because it has been locked for more than 20 minutes, just follow the instructions below. Note that rebooting a workstation will cause any unsaved data to be permanently lost. If you encounter any trouble, please either contact a consultant, or report the problem to Athena Cluster Serivces (x3-1101 or servicedesk@mit.edu).

Linux workstations

Press Ctrl-Alt-F1, which should cause the screen to switch to text mode (there may be some text displayed on the screen, or it may be blank). Then, press Ctrl-Alt-Delete. In a few seconds, the machine should begin rebooting.

If the previous method fails, you can try pressing the power button on the machine once. After a few seconds, the machine should begin shutting down, or it may bring up a dialog asking you what you want to do. Once it has powered itself off, you can turn it back on by pressing the power button again.

If all else fails, you can press and hold the power button on the machine for 5 seconds, which will immediately power it down. This will perform an unclean shutdown, and the machine will need to check its disk when it is powered back on, which will take longer than a normal start-up.

IS&T Contributions

Documentation and information provided by IS&T staff members


Last Modified:

March 27, 2017

Get Help

Request help
from the Help Desk
Report a security incident
to the Security Team
Labels:
olc-workstations olc-workstations Delete
reboot reboot Delete
workstation workstation Delete
athena athena Delete
Enter labels to add to this page:
Please wait 
Looking for a label? Just start typing.
Feedback
This product/service is:
Easy to use
Average
Difficult to use

This article is:
Helpful
Inaccurate
Obsolete
Adaptavist Theme Builder (4.2.3) Powered by Atlassian Confluence 3.5.13, the Enterprise Wiki