Access Keys:
Skip to content (Access Key - 0)

Windows 7 - Set up with a Static IP Address

Below are the steps for setting up your Windows 7 computer with a static IP address. After you set it up, you will need to activate your copy of Windows 7.

  1. From the Start Menu, go to Control Panel > Network and Internet > Network and Sharing Center.
  2. From the View Your Active Networks section, select Local Area Connection.
  3. Go to Properties.
    Result: The Local Area Connection Properties screen appears.
  4. Highlight Internet Protocol Version 4 (TCP/IPv4) and click on Properties.
    Result: The Internet Protocol Version 4 (TCP/IPv4) Properties screen appears.
  5. Click Use the following IP address.
  6. Complete the configuration fields as shown below.
    This part of the configuration requires attention to detail, because one error will prevent you from getting on the network. Be sure you have this information at hand when you start to configure the TCP/IP protocol:
    • IP Address: 18.x.y.z (where x,y, and z are numbers)
    • Subnet mask: 255.255.0.0
    • Default gateway: 18.x.0.1 (Where x matches the x in your IP address)
    • DNS (Domain Name Servers): 18.71.0.151, 18.70.0.160, 18.72.0.3
  7. Enter these numbers in the appropriate fields and click OK.

IS&T Contributions

Documentation and information provided by IS&T staff members


Last Modified:

December 23, 2015

Get Help

Request help
from the Help Desk
Report a security incident
to the Security Team
Labels:
m-hermes m-hermes Delete
staticipaddress staticipaddress Delete
windows7 windows7 Delete
software software Delete
static static Delete
ip ip Delete
address address Delete
windows windows Delete
c-windows-7 c-windows-7 Delete
Enter labels to add to this page:
Please wait 
Looking for a label? Just start typing.
Feedback
This product/service is:
Easy to use
Average
Difficult to use

This article is:
Helpful
Inaccurate
Obsolete
Adaptavist Theme Builder (4.2.3) Powered by Atlassian Confluence 3.5.13, the Enterprise Wiki